EVB/QC EP-VERTICAL BINDER

Preparation

• drill with mixing spindle attachment
• flat trowels (stainless steel or plastic)
• plant spraye
• gloves

Mixing

• check you have sufficient material (for consumption, see label)
• Mask off if necessary

Mixing

• Put the granulates in a mixing tub or compulsory mixer,
• Combine the A and B component in the correct proportion (see label),
• mix for 2 minutes, using a drill with mixing spindle attachment, until a homogeneous mixture

Clean tools

• apply as a primer coat +/- 600 g pure binding agent on 1 m² (+/- 14 metres of skirting board or +/- 5-6 vertical steps) on the surface with a block brush
• apply the gravel mixture wet-on-wet (i.e. before the primer layer is dry) with a stainless steel trowel
• Press/compact well
• Clean trowel or other tools regularly

Additional points of attention

• Used brushes cannot be reused.
• Empty packaging: cured material or scrapings => construction waste, otherwise => chemical waste
• Clean mixing spindle attachment with acetone

Disclaimer

• Do not use for outdoor applications

Video

Disclaimer

These brief installation instructions are provided to help you quickly get started with the installation. However, it is important to first read the technical data sheet and to take note of the safety data sheets Both documents can be found at the bottom of this page under downloads