Best wishes! 🎉 Here you will find our adjusted opening hours
Depending on the application and the builder's wishes, there are different finishes available with a cast floor. Below you will find a description of one of the possible finishes with the corresponding properties. On the page with the overview of all screed systems, you can also compare the properties of the different finishes in a comparison table.
Flowdec PU
This aesthetic PU (polyurethane) poured floor , is made up of a primer, a self-levelling compound, the coloured pouring layer and a top coat. The floor therefore consists of 4 layers.
The choice of primer depends on the type of substrate. To make it easy for you, we have added a document in Downloads below so you can easily see for yourself which primer is the most suitable for you. The epoxy self-levelling compound has 2 functions: to ensure air cannot rise from the substrate (which is necessary to prevent air bubbles in the finished floor) and to eliminate small irregularities in the substrate.
The coloured poured floor itself is made from tough-elastic polyurethane resin. This means the floor is not as hard, but is slightly more flexible than a standard epoxy poured floor. This reduces the chances of small hairline cracks, while making it more pleasant to walk on.
The Flowdec PU is given an extra top coat. This coloured varnish is available in most RAL and NCS colours. The water-based top coat ensures the whole has a very flat/tight surface.
Finish:
Floor System
Self-leveling floor
Brand
SIDEC
Gloss level
Matt
Location
Interior
Permeability
liquid-proof (HACCP)
Scratch resistance
Low
Easy to clean (dirt repellent)
UV resistance
Floor level
Hard / soft
Installation lead time
Structure
Budget