Depending on the application and the builder's wishes, there are several different finishes possible with an anti-slip floor. Below you will find a description of one of the possible finishes with the corresponding properties. On the page with the overview of all Anti-slip floor systems, you can also compare the properties of the different finishes in a comparison table.
Safedec Basic
The composition of this anti-slip floor is formed by a transparent primer which is sprinkled with a natural sand/gravel of 0.1-0.3mm or 0.4-0.8mm or 0.8-1.2mm and then sealed with a colored epoxy coating. This produces a uniformly colored non-slip floor.
Depending on the grain size of the granules used and the amount of colored epoxy coating, a fine or coarse anti-slip effect is obtained. In addition to the standard quartz granules, you can also choose to sprinkle with carbodura 0.5-1.5 mm (an even more wear-resistant grain).
This floor consists of 2 or 3 layers : primer (encrusted), colored epoxy coating. The installation height of this system is 2 to 4 mm.
The primer should be chosen ifv the type of substrate. To make it easy for you, we have added a document in Downloads below so you can easily see for yourself which primer is the most suitable for you.
For renovations over an existing tile floor or uneven floors, it is recommended that a leveling coating be applied first to prevent the tile pattern or unevenness from remaining too brightly visible after the floor is installed.
Because the granules are completely encased by epoxy, dirt and water cannot penetrate the floor. This means that the floor protects against slipping even in wet conditions and is therefore extremely suitable for various industrial applications such as slaughterhouses, cold stores, fish and other food industries, garages, ... but it can also be used in the agricultural industry.
Finish:
Floor System
Spreading floor
Brand
SIDEC
Gloss level
Gloss
Location
Interior
Anti-slip
R13/V6
Permeability
Not applicable
Scratch resistance
Low
Easy to clean (dirt repellent)
UV resistance
Floor level
Hard / soft
Installation lead time
Structure
Budget
Grit size
| 🇳🇱 | 🇫🇷 | 🇬🇧 | 🇩🇪 | |
|---|---|---|---|---|
| Installation Installation Installation Installation |
NL |
|||
| Werken met kunststofvloeren Travailler avec sols synthetiques Working with resins Verarbeiten von Kunststofbodenbelägen |
NL |
FR |
EN |
DE |
| Welke primer kiezen? Quelle primaires à choiser? Which primer to choose? Welche Grundierung wählen? |
NL |
FR |
EN |
DE |