Floor Preparation
PUSL-GOLD-WATERPROOF-A+B is suitable as flexible interlayer underneath coatings. Especially suitable for kitchen areas as well as a crack-bridging sealing coat underneath reactive resin coatings (decorative coatings). Suitable for interior and exterior areas.
> MORE INFO
Primers
Low viscosity, 1- component acrylate copolymer dispersion. This transparent substance is used to bind dusty bases (cement, plaster, wood…) and to rid them of dust.
> MORE INFO
2-component, emmison free, low-viscosity, colourless epoxy binder with a super low degree of yellowing. Potlife is 40 minutes.
...> MORE INFO
Water-based epoxy primer which off ers excellent bonding to glazed tiles and various other bases.
> MORE INFO
EQC/A+B is a universal, low-viscosity, 2-component, sovent-free, pigment-free colourless epoxy primer for concrete floors, wooden, screed and anhydrite floors.
> MORE INFO
Solvent free epoxy primer which off ers excellent bonding to glazed tiles, polished concrete and glass.
> MORE INFO
Granules
Quartz that has been washed and fire-dried on multiple occasions and that has been sieved in different grain sizes. The gravel is characterised by a very high chemical and mineral purity, is pH- neutral and is free of organic residue and salts.
> MORE INFO
Quartz that has been washed and fire-dried on multiple occasions and that has been sieved in different grain sizes. The gravel is characterised by a very high chemical and mineral purity, is pH- neutral and is free of organic residue and salts.
> MORE INFO
Marble stone for carpets is available in 16 different natural colours and granules in three different sizes: 1- 4mm, 4-8mm and 5-12mm. Also Sidec tries to limit fine dust to a minimum by additional sieving.
Attention: Both in terms...> MORE INFO
Binders
EAA.010/A+B is a low-viscosity, colourless epoxy binder with a very low degree of yellowing. Pot-life is 30 minutes.
> MORE INFO
2-component, low-viscosity, colourless epoxy binder with a super low degree of yellowing. Potlife is 60 minutes.
> MORE INFO
2-component epoxy binder for quartz carpet, with a very low degree of yellowing, nonylphenolfree and anti-allergetic. Potlife is 60 minutes.
> MORE INFO
2-component epoxy binder for quartz carpet, with a very low degree of yellowing, nonylphenolfree and anti-allergetic. Potlife is 60 minutes.
> MORE INFO
2-component, emmison free, low-viscosity, colourless epoxy binder with a super low degree of yellowing. Potlife is 40 minutes.
...> MORE INFO
PU360 can be used as a binder for quartz carpet/marble carpet where epoxy is expected to give UV related yellowing problems, for external (balcony, terraces,...) as well as internal use (verandas, rooms with a lot of window-glass,...). PU300 is a 1-component,...> MORE INFO
Vertical Binders
2-komponent vertical binder for quartz carpet. is primarily used with 1-2mm, 2-3mm and 3-4mm granulates on the vertical section of stairs and plinths.
> MORE INFO
PUVB.02 / QC PU VERTICAl BINDER 02 is a thixotropic, 1-component, pu binding product for vertically applying stone carpets.
> MORE INFO
Pore fillers
1-component high viscosity, single component acrylate co-polymer dispersion to seal pores in decorative aggregate floors. With a very high waterresistance, no yelowing, covers most, if not all, holes, and virtually no squeegee...> MORE INFO
Top coats
Low-emission 2-comp epoxy resin emulsion sealer for matt sealing of epoxy resin coatings.
> MORE INFO
PUW-ETC/A+B+C is an aliphatic water-based 3-component polyurethane top coat. PUW-ETC/A+B +C is available in gloss and is hot tire resistant (for instance for car tyres, cycling tyres, rubber doormats, ...)
> MORE INFO
PUW-ETC ANTISLIP/A+B+C is an aliphatic water-based 3-component polyurethane top coat. PUW-ETC/A+B +C is available in satin and is hot tire resistant (for instance for car tyres, cycling tyres, rubber doormats, ...)
> MORE INFO
Water-based, 2-component, polyurethane finishing coat, scratch-resistant, used on epoxy coatings, epoxy cast-house floors, polyurethane coatings and cast-house floors, epoxy floorsand and on epoxy mortar / shingle floors, dries without stripes.
> MORE INFO
Renovation Coating
2-component pigmented epoxy coating for applying a new layer of colour decoration gravel floors. Used to freshen up the appearance of decorative gravel floors.
> MORE INFO
Floor Preparation
PUSL-GOLD-WATERPROOF-A+B is suitable as flexible interlayer underneath coatings. Especially suitable for kitchen areas as well as a crack-bridging sealing coat underneath reactive resin coatings (decorative coatings). Suitable for interior and exterior areas.
> MORE INFO
Primers
EQC/A+B is a universal, low-viscosity, 2-component, sovent-free, pigment-free colourless epoxy primer for concrete floors, wooden, screed and anhydrite floors.
> MORE INFO
Solvent free epoxy primer which off ers excellent bonding to glazed tiles, polished concrete and glass.
> MORE INFO
Granules
Quartz that has been washed and fire-dried on multiple occasions and that has been sieved in different grain sizes. The gravel is characterised by a very high chemical and mineral purity, is pH- neutral and is free of organic residue and salts.
> MORE INFO
Quartz that has been washed and fire-dried on multiple occasions and that has been sieved in different grain sizes. The gravel is characterised by a very high chemical and mineral purity, is pH- neutral and is free of organic residue and salts.
> MORE INFO
Marble stone for carpets is available in 16 different natural colours and granules in three different sizes: 1- 4mm, 4-8mm and 5-12mm. Also Sidec tries to limit fine dust to a minimum by additional sieving.
Attention: Both in terms...> MORE INFO
Binders
PU360 can be used as a binder for quartz carpet/marble carpet where epoxy is expected to give UV related yellowing problems, for external (balcony, terraces,...) as well as internal use (verandas, rooms with a lot of window-glass,...). PU300 is a 1-component,...> MORE INFO
Vertical Binders
PUVB.02 / QC PU VERTICAl BINDER 02 is a thixotropic, 1-component, pu binding product for vertically applying stone carpets.
> MORE INFO
Primers
Water-based epoxy primer which off ers excellent bonding to glazed tiles and various other bases.
> MORE INFO
EQC/A+B is a universal, low-viscosity, 2-component, sovent-free, pigment-free colourless epoxy primer for concrete floors, wooden, screed and anhydrite floors.
> MORE INFO
Solvent free epoxy primer which off ers excellent bonding to glazed tiles, polished concrete and glass.
> MORE INFO
Granules
Quartz that has been washed and fire-dried on multiple occasions and that has been sieved in different grain sizes. The gravel is characterised by a very high chemical and mineral purity, is pH- neutral and is free of organic residue and salts.
> MORE INFO
Quartz that has been washed and fire-dried on multiple occasions and that has been sieved in different grain sizes. The gravel is characterised by a very high chemical and mineral purity, is pH- neutral and is free of organic residue and salts.
> MORE INFO
Binders
2-component binder for voor trowel and mortar flooring, with a very low degree of yellowing, nonylphenolfree and anti-allergetic. Dry after 16h till 18h.
> MORE INFO
Pore fillers
PA-CLEAR-FILLER/A+B is a polyaspartic (PA) gel. This thickened solvent-free, transparent, 2-component PA gel is used as a finishing coat for epoxy mortar - and trowel applied polymer flooring.
> MORE INFO
Top coats
Low-emission 2-comp epoxy resin emulsion sealer for matt sealing of epoxy resin coatings.
> MORE INFO
PU-TOPCOAT NO SCRATCH 02 is a top coat for epoxy and polyurethane synthetic resin floors, with very high scratch and fade resistance.
PUW-ETC ANTISLIP/A+B+C is an aliphatic water-based 3-component polyurethane top coat. PUW-ETC/A+B +C is available in satin and is hot tire resistant (for instance for car tyres, cycling tyres, rubber doormats, ...)
> MORE INFO
Water-based, 2-component, polyurethane finishing coat, scratch-resistant, used on epoxy coatings, epoxy cast-house floors, polyurethane coatings and cast-house floors, epoxy floorsand and on epoxy mortar / shingle floors, dries without stripes.
> MORE INFO
Floor Preparation
EPSL-FORTE/A+B+C is a 3 component, solvent-free, coloured and fi lled epoxy self leveling 2 to 3 mm floor.
> MORE INFO
3 component, extremely fine skirting board, perfect for straight and hollow corner skirting boards for casting floors, gritted floors,... or for repairing small and deep holes in concrete floors
> MORE INFO
2-component self levelling coating, a solvent-free, pigment-free epoxy flooring system. Perfect to flatten damaged or rough floors.
> MORE INFO
Primers
EQC/A+B is a universal, low-viscosity, 2-component, sovent-free, pigment-free colourless epoxy primer for concrete floors, wooden, screed and anhydrite floors.
> MORE INFO
Solvent free epoxy primer which off ers excellent bonding to glazed tiles, polished concrete and glass.
> MORE INFO
Self Levelling EP
EPSL-FORTE/A+B+C is a 3 component, solvent-free, coloured and fi lled epoxy self leveling 2 to 3 mm floor.
> MORE INFO
Top coats
Low-emission 2-comp epoxy resin emulsion sealer for matt sealing of epoxy resin coatings.
> MORE INFO
PU-TOPCOAT NO SCRATCH 02 is a top coat for epoxy and polyurethane synthetic resin floors, with very high scratch and fade resistance.
Water-based, 2-component, polyurethane finishing coat, scratch-resistant, used on epoxy coatings, epoxy cast-house floors, polyurethane coatings and cast-house floors, epoxy floorsand and on epoxy mortar / shingle floors, dries without stripes.
> MORE INFO
PUW-TOPCOLOR/A + B is a water-based 2 component polyurethane coloured top coating, suitable as matte coloured, wear-resistant non yellowing finishing layer on self leveling floors.
> MORE INFO
Floor Preparation
EPSL-FINE/A+B+C is a 3 component, solvent-free, coloured and filled epoxy self leveling floor allowing for a1 to 2 mm floor.
> MORE INFO
3 component, extremely fine skirting board, perfect for straight and hollow corner skirting boards for casting floors, gritted floors,... or for repairing small and deep holes in concrete floors
> MORE INFO
2-component self levelling coating, a solvent-free, pigment-free epoxy flooring system. Perfect to flatten damaged or rough floors.
> MORE INFO
Primers
EQC/A+B is a universal, low-viscosity, 2-component, sovent-free, pigment-free colourless epoxy primer for concrete floors, wooden, screed and anhydrite floors.
> MORE INFO
Solvent free epoxy primer which off ers excellent bonding to glazed tiles, polished concrete and glass.
> MORE INFO
Self Levelling EP
EPSL-FINE/A+B+C is a 3 component, solvent-free, coloured and filled epoxy self leveling floor allowing for a1 to 2 mm floor.
> MORE INFO
Top coats
Low-emission 2-comp epoxy resin emulsion sealer for matt sealing of epoxy resin coatings.
> MORE INFO
PU-TOPCOAT NO SCRATCH 02 is a top coat for epoxy and polyurethane synthetic resin floors, with very high scratch and fade resistance.
Water-based, 2-component, polyurethane finishing coat, scratch-resistant, used on epoxy coatings, epoxy cast-house floors, polyurethane coatings and cast-house floors, epoxy floorsand and on epoxy mortar / shingle floors, dries without stripes.
> MORE INFO
PUW-TOPCOLOR/A + B is a water-based 2 component polyurethane coloured top coating, suitable as matte coloured, wear-resistant non yellowing finishing layer on self leveling floors.
> MORE INFO
Granules
Quartz that has been washed and fire-dried on multiple occasions and that has been sieved in different grain sizes. The gravel is characterised by a very high chemical and mineral purity, is pH- neutral and is free of organic residue and salts.
> MORE INFO
Binders
TERRADEC-CLEAR can be used as a binder for water permeable floors (system thickness between 2cm and 6cm) where epoxy is expected to give UV related yellowing problems.
> MORE INFO
TERRA-GOLD/A+B is a 2-component, hard-elastic, polyurethane binding agent with low viscosity. TERRA-GOLD/A+B can be used as a binding agent for placing permeable hard surfaces.
> MORE INFO
Terradec Easy Fit is easy to use and stabilises joints in pavers, setts, natural stone. Terradec Easy Fit can be used for pointing all natural stone, pavers, setts, and concrete paving slabs....> MORE INFO
Floor Preparation
EPSL-FORTE/A+B+C is a 3 component, solvent-free, coloured and fi lled epoxy self leveling 2 to 3 mm floor.
> MORE INFO
3 component, extremely fine skirting board, perfect for straight and hollow corner skirting boards for casting floors, gritted floors,... or for repairing small and deep holes in concrete floors
> MORE INFO
2-component self levelling coating, a solvent-free, pigment-free epoxy flooring system. Perfect to flatten damaged or rough floors.
> MORE INFO
Primers
Water-based epoxy primer which off ers excellent bonding to glazed tiles and various other bases.
> MORE INFO
EQC/A+B is a universal, low-viscosity, 2-component, sovent-free, pigment-free colourless epoxy primer for concrete floors, wooden, screed and anhydrite floors.
> MORE INFO
Solvent free epoxy primer which off ers excellent bonding to glazed tiles, polished concrete and glass.
> MORE INFO
Granules
Quartz that has been washed and fire-dried on multiple occasions and that has been sieved in different grain sizes. The gravel is characterised by a very high chemical and mineral purity, is pH- neutral and is free of organic residue and salts.
> MORE INFO
Quartz that has been washed and fire-dried on multiple occasions and that has been sieved in different grain sizes. The gravel is characterised by a very high chemical and mineral purity, is pH- neutral and is free of organic residue and salts.
> MORE INFO
Self Levelling EP
EPSL-FORTE/A+B+C is a 3 component, solvent-free, coloured and fi lled epoxy self leveling 2 to 3 mm floor.
> MORE INFO
Top coats
PUW-ETC ANTISLIP/A+B+C is an aliphatic water-based 3-component polyurethane top coat. PUW-ETC/A+B +C is available in satin and is hot tire resistant (for instance for car tyres, cycling tyres, rubber doormats, ...)
> MORE INFO
Granules
Very pure crystalline dolomite, which is exceptionally white and is available in a very uniform size.
> MORE INFO
Quartz that has been washed and fire-dried on multiple occasions and that has been sieved in different grain sizes. The gravel is characterised by a very high chemical and mineral purity, is pH- neutral and is free of organic residue and salts.
> MORE INFO
Vertical Binders
2-komponent vertical binder for quartz carpet. is primarily used with 1-2mm, 2-3mm and 3-4mm granulates on the vertical section of stairs and plinths.
> MORE INFO
PUVB.02 / QC PU VERTICAl BINDER 02 is a thixotropic, 1-component, pu binding product for vertically applying stone carpets.
> MORE INFO
Sports Sand
AceCourt Tennis Infill ® is one of the products of Sidec for sprinkling tennis infill on artificial grass courts. The company is known for being the inventor of high-quality, coloured quartz (minimum 96% SIO2) that always undergoes thorough sieving processes.
Because...> MORE INFO